FOR SOLAR ECLIPSES
Zonnefiltervel voor Telescopen, Verrekijkers & Cameralenzen — Doe-het-zelf Zonnefilm, OD 5.6
READY FOR 2026, 12th AugustEN ISO 12312-2 certified solar viewer — safe for direct viewing of the 12 August 2026 total eclipse.
Incl. VAT.
- AAS-recognized
- CE Category II
- EN ISO 12312-2
- QR-verified
Ships in 24 h from inside the EU on tracked delivery.
30-day returns on unopened items — no questions asked.
Demand peaks close to the date — order early.
It’s today — view safely.amazon · prefer Prime?
The same EN ISO 12312-2 certified glasses are listed on Amazon Germany — useful if you'd rather use Prime delivery or existing credit. Buying direct here is usually cheaper and ships from the EU.
CUT-TO-SIZE SOLAR FILTER FILM - OD 5.6
One Film. All Your Optics. The Sun, Safely.
Cut the film to fit your optics: telescope, binoculars, spotting scope or camera lens. Tested to ISO 12312-2 by an accredited laboratory, it blocks 99.9998% of sunlight and reveals a sharp, detailed orange solar disc. Get ready for the eclipse on 12 August 2026.
Create Filters for All Your Optics
Camera Lenses
Build a front-mounted filter for solar photography with your compatible lenses. Attach it securely in front of the front element.
Spotting Scopes
Mount the film over the front aperture of your spotting scope for safe terrestrial-style solar observing.
Telescopes
Make a custom front filter for telescopes and large apertures. Always in front of the tube - never at the eyepiece.
Binoculars
Cut two front filters, one for each objective lens, mounted on separate cells.
The Right Filter for Every Aperture
Measure, Cut, Mount, Check
1. Measure Your Aperture
Note the outer diameter of the tube or lens and cut a cardboard ring slightly larger than the front of your instrument.
2. Cut to Size
Lay the film flat and cut a disc with a 10 mm margin on each side. Handle it by the edges without creasing the surface.
3. Mount It Securely
Place the disc on the cardboard ring and fix it with tape - flat and firmly held, with no risk of slipping off.
4. Check Before Every Use
Inspect the film against a bright light: no pinholes, scratches or tears. Cover the finderscope and replace if damaged.
About this model
Het Absolute Eclipse Zonnefiltervel is een flexibele zonnefilm voor veilige, directe observatie en fotografie van de zon door optische instrumenten. Knip het vel op maat en monteer het over de voorste opening van een telescoop, paar verrekijkers, spotting scope of cameralens om zonnevlekken, planeetovergangen en zonsverduisteringen te bekijken — of om je eigen aangepaste zonnefilter te bouwen voor een fractie van de kosten van een kant-en-klare.
De film is een gealuminiseerd polymeer dat niet meer dan 0,00023% van het zichtbare licht doorlaat — een optische dichtheid van minstens OD 5.6 — en vermindert de ultraviolette, zichtbare en infrarode straling van de zon tot comfortabele kijkniveaus, waardoor een scherpe, natuurlijke oranje zonneschijf met duidelijke zonnevlekdetails wordt weergegeven. Het filtermateriaal is onafhankelijk getest door ICS Laboratories (een ISO/IEC 17025 geaccrediteerd testlaboratorium).
Verkrijgbaar in drie vierkante maten — 100×100 mm, 150×150 mm en 210×210 mm — geschikt voor alles van een cameralens tot een grote refractor of verrekijkers. Meet de opening van je instrument, knip het vel bij en laat minstens 10 mm overlap aan elke kant, en bevestig het over de voorste opening met een stevig frame, houder of tape. Positioneer de zilveren reflecterende zijde naar de zon en de zwarte zijde naar het instrument.
⚠ Veiligheid
Dit filter moet altijd het eerste optische element zijn tussen de zon en je instrument. Plaats het nooit achter het oculair of een lens, waar geconcentreerd zonlicht doorheen brandt en directe, permanente schade veroorzaakt. Inspecteer de film voor elk gebruik en gebruik deze niet als deze bekrast, geperforeerd of gekreukt is. Houd kinderen te allen tijde onder toezicht.
Hoe te gebruiken
- Beste zonnefilter voor een camera — hoe te kiezen, en waarom een ND-filter geen zonnefilter is
- Hoe de zon & een zonsverduistering te fotograferen — de volledige beginnershandleiding
- Camera-instellingen (ISO, diafragma, sluiter) — het kopieerbare belichtingsspiekbriefje
Fabrikant: SIA Gravitis Enterprise Limited, Lauku iela 7-4, Cēsis, LV-4101, Letland.
Specifications
Specifications
- Certification
- Material tested by ICS Laboratories (ISO/IEC 17025)
- Optical density
- OD 5.6 — transmits ≤ 0.00023% visible light
- Blocks
- Ultraviolet, visible & infrared radiation
- Material
- Aluminised polymer film
- Sizes
- 100×100 mm · 150×150 mm · 210×210 mm
- Use
- Telescopes, binoculars, spotting scopes & camera lenses
- Mounting
- Silver side towards the Sun, black side to the instrument
How to view safely
Certified — but only if you use them right
-
01
Measure your aperture
Measure the front aperture of your telescope, binoculars or lens before cutting.
-
02
Cut & mount over the front
Trim the sheet leaving at least 10 mm overlap on every side, and secure it over the FRONT aperture — never behind the eyepiece or lens.
-
03
Inspect, then observe
Check the film for pinholes, scratches or creases. Position the silver side towards the Sun and observe. Supervise children at all times.
Do
- Mount the filter over the FRONT aperture, before any lens
- Leave at least 10 mm overlap and secure it firmly
- Face the silver reflective side towards the Sun
- Inspect the film for damage before every use
Don't
- Place the filter behind the eyepiece or a lens — it will burn through instantly
- Use the film if scratched, pinholed or creased
- Leave gaps where direct sunlight can bypass the filter
- Leave children unsupervised during observation
Plan your viewing
Be in the right place on 12 August 2026
Bulk & wholesale
Buying for a school, event or resale?
Per-unit price keeps dropping with volume. Order in bulk here, or talk to us for pallet pricing, custom branding and invoicing.